Effect of Open Tray Versus Digital Impressions on the Passivity and Prosthetic Complications of Full Arch Screw-retained Prosthesis
NCT04848207 · Status: UNKNOWN · Phase: NA · Type: INTERVENTIONAL · Enrollment: 92
Last updated 2021-04-19
Summary
The importance of this trial lies in testing if intraoral digital impressions will increase the accuracy of impressions of full arch implant cases over conventional impression techniques thus improving the passivity of full arch screw retained prosthesis and decreasing the prosthetic complications in turn.
Conditions
- Passivity
- Prosthetic Complications
Interventions
- DEVICE
-
Digital impression technique
3D printed generic Scan bodies with unified shape and length replacing the traditional transfer copings will be press fitted on the trans-mucosal abutments and pickup cylinders that are screwed on the implants to capture their position and intra-oral scanning will be done.
- OTHER
-
Open tray impression technique
Transfer copings will be screwed to the multiunit abutments on the existing implants, and splinted together using pre-cured printed resin splinting framework that will be fixed to the copings using flowable composite . A one step impression technique using putty and light addition silicon will be made, where light impression material will be injected all around transfer copings and putty silicon will be loaded in tray and then will be seated intra-orally making sure to fully expose the screws of transfer copings through the impression material.
Sponsors & Collaborators
-
Cairo University
lead OTHER
Study Design
- Allocation
- RANDOMIZED
- Purpose
- TREATMENT
- Masking
- DOUBLE
- Model
- PARALLEL
Eligibility
- Sex
- ALL
- Healthy Volunteers
- Yes
Timeline & Regulatory
- Start
- 2021-06-30
- Primary Completion
- 2022-12-31
- Completion
- 2022-12-31
More Related Trials
-
Comparative Accuracy of Conventional Scan Bodies, Intra-oral Photogrammetry, and Calibrated Scan Flags in Full-Arch Implant Scanning
NCT07200440 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Denture Retention of Intra-orally Scanned Versus Extra-orally Scanned Digitally Printed Maxillary Denture in Completely Edentulous Patients
NCT07290322 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Complete Digital Workflow for Construction of Full Arch Implant Supported Screw Retained Restoration
NCT06067334 ·Status: COMPLETED ·Phase: NA
-
Digital Versus Conventional Impression Technique in Mandibular Arch
NCT05770011 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
3D-Printed Implant Overdentures: Comparing Impression Techniques
NCT07208812 ·Status: RECRUITING ·Phase: NA
-
Accuracy of Intraoral Photogrammetry vs Optical Scanners for Immediate Full-Arch Implant Loading
NCT07320729 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Trueness of Full Arch Scans and Generated Digital Implant Models
NCT06281002 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Complete Digital Workflow for Construction of Full Arch Implant Supported Screw Retained Restoration
NCT06332482 ·Status: COMPLETED ·Phase: NA
-
Assessment of the Accuracy of Surgical Guide Designed From Dental Model Optical Scan Versus Impression Inversion With Markers Techniques in Computer Guided Implantology. Randomized Clinical Trial.
NCT03367949 ·Status: UNKNOWN ·Phase: NA
-
Accuracy of Two Methods of Making Impressions for Complete-arch Implant Supported Fixed Prosthesis
NCT06343441 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Digital Versus Conventional Full-arch Implant Impression in Maxillary Screw- Retained Implant Prosthesis
NCT05709236 ·Status: COMPLETED ·Phase: NA
-
Complete Denture Tooth Movement in Digital Light Processing Versus Conventional Fabrication Techniques
NCT04025697 ·Status: UNKNOWN ·Phase: NA
-
Immediate Implant Placement With Different Materials of Customized Healing Abutment for Guiding Peri-implant Soft Tissue Healing in Posterior Teeth
NCT06645444 ·Status: COMPLETED ·Phase: NA
-
Study of Wear in Composite Resin and Reinforced Acrylic Denture Teeth Used in Complete Denture Construction for Completely Edentulous Patients
NCT04839640 ·Status: COMPLETED ·Phase: NA
-
Accuracy of Guided Implant Placement Using Double Versus Triple Scan Protocol in Completely Edentulous Patients
NCT03321162 ·Status: UNKNOWN
-
Comparison of Conventional Versus 3-D Printed Complete Denture Regarding Retention, Accuracy, Elctromyographic Activity and Patient Satisfaction.
NCT05834530 ·Status: COMPLETED ·Phase: NA
-
Digital Intraoral Scanning With and Without Prefabricated Landmarks Versus Conventional Impression Technique
NCT06592066 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Conventional Impressions Versus Digital Impression Techniques for Implant Supported Screw Retained Prosthesis
NCT05912725 ·Status: COMPLETED ·Phase: NA
-
Influence of Abutment Angulation on Implant Failure in Immediately Placed and Restored Implants in the Esthetic Zone Using Computer Aided Surgical Guides: RCT
NCT03243695 ·Status: COMPLETED ·Phase: NA
-
Accuracy Evaluation of Implant Impressions: A Prospective Study
NCT06393582 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Dental Implant Stability Placed in Healed Bony Sites Using Oversized Drilling Versus Conventional Drilling Protocol
NCT06917638 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
"Patient Satisfaction with Intra-Oral Vs. Extra-Oral Scanned 3D-Printed Dentures: an in Vivo Study"
NCT06846619 ·Status: RECRUITING ·Phase: NA
-
Accuracy of Tooth Modified Scan Bodies as a Novel Technique
NCT06177782 ·Status: COMPLETED ·Phase: NA
-
Retention, Chewing Efficiency and Masticatory Performance of Partial Dentures Opposing Implant Retained Prosthesis.
NCT05999760 ·Status: COMPLETED ·Phase: NA
-
Influence of Digitalized Impression on Single Peri-implant Soft Tissue Profile
NCT06702969 ·Status: COMPLETED ·Phase: NA