Denture Retention of Intra-orally Scanned Versus Extra-orally Scanned Digitally Printed Maxillary Denture in Completely Edentulous Patients
NCT07290322 · Status: ACTIVE_NOT_RECRUITING · Phase: NA · Type: INTERVENTIONAL · Enrollment: 8
Last updated 2025-12-18
Summary
The goal of this clinical trial is to evaluate denture retention in intra-orally scanned versus extra-orally scanned digitally printed maxillary dentures in completely edentulous patients. The main question is : 1. Do intra-orally scanned dentures provide better retention compared to extra-orally scanned dentures? Researchers will compare the intra-orally scanned denture group to the extraorally scanned denture group to determine if one method leads to superior retention records.
Participants will:
• Receive both types of dentures (intra-orally scanned and extra-orally scanned), with a three-week wash-out period between each intervention. The study aims to provide evidence on the optimal scanning method for digitally printed maxillary dentures in edentulous patients.
Conditions
- Complete Edentulism
Interventions
- DEVICE
-
Intaorally scanned methods
the intraoral scanning method involves capturing digital impressions of the oral cavity directly using the 3 shape scanner . this method eliminates the need for traditional impression material providing a more comfortable and precise imaging process , the digital impressions are the utilized to design and fabricate maxillary dentures using 3D printing technology . the intervention focuses on evaluating denture's retention
- DEVICE
-
extraorally scanned methods
The extra-oral scanning method involves creating conventional impressions of the oral cavity using traditional impression materials. These impressions are then scanned externally using the 3Shape scanner to produce digital models. The digital models are used to design and fabricate maxillary dentures through 3D printing technology. This intervention aims to assess denture retention
Sponsors & Collaborators
-
Cairo University
lead OTHER
Principal Investigators
-
Rehab R Abdalla · Cairo University
Study Design
- Allocation
- NON_RANDOMIZED
- Purpose
- TREATMENT
- Masking
- NONE
- Model
- CROSSOVER
Eligibility
- Sex
- ALL
- Healthy Volunteers
- Yes
Timeline & Regulatory
- Start
- 2024-12-03
- Primary Completion
- 2026-09-01
- Completion
- 2026-09-01
Countries
- Egypt
Study Locations
More Related Trials
-
Conventional Versus 3D Printing Duplication Techniques of Complete Denture
NCT06588140 ·Status: COMPLETED ·Phase: NA
-
Assessment of Wear and Muscular Efficiency of 3D Printed Versus Conventional Denture Teeth: A Cross-Over In Vivo Study
NCT07035574 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Evaluation of Digital 3D Printed Temporary Removable Partial Denture.
NCT06106243 ·Status: RECRUITING ·Phase: NA
-
Patient Satisfaction & Retention of Milled, 3D Printed and Conventional Complete Dentures
NCT03281603 ·Status: COMPLETED ·Phase: NA
-
Conventional Versus Digital 3D Printed Complete Removable Dentures
NCT05845099 ·Status: COMPLETED ·Phase: NA
-
To Evaluate the Complete Mandibular Dentures Produced Via 3D Printing in Comparison to Those Constructed From Metal-reinforced Acrylic Resin Regarding Their Retention
NCT07061860 ·Status: COMPLETED ·Phase: NA
-
Retention of Complete Denture Using Rapid Prototyping
NCT03507179 ·Status: UNKNOWN ·Phase: NA
-
Effect Of Digital Smile Design on Quality Of Life In Complete Denture Wearers
NCT06324292 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
3D-Printed Implant Overdentures: Comparing Impression Techniques
NCT07208812 ·Status: RECRUITING ·Phase: NA
-
Digital Versus Conventional Full-arch Implant Impression in Maxillary Screw- Retained Implant Prosthesis
NCT05709236 ·Status: COMPLETED ·Phase: NA
-
Compare the Difference in Occlusal Force Distribution and Denture Retention Using 2 Different Denture Base Materials in Implant Retained Overdenture
NCT07250503 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
3D-printed Implant Overdentures
NCT04569929 ·Status: COMPLETED ·Phase: NA
-
Comparison Between Single Implant Retained Partial Over-denture and Conventional Partial Denture
NCT03324789 ·Status: UNKNOWN ·Phase: NA
-
Comparison of Patient Satisfaction and Chewing Efficiency Between Conventional and 3D Printed Complete Dentures.
NCT06103019 ·Status: COMPLETED ·Phase: NA
-
Conventional Versus Neutral-Zone CAD/CAM Dentures Restoring Mandibular Resorbed Ridges
NCT05895292 ·Status: COMPLETED ·Phase: NA
-
Trueness of Full Arch Scans and Generated Digital Implant Models
NCT06281002 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Passive Fit of CAD/CAM Screw-retained Metal Frameworks Versus Screwmented Ones
NCT04372901 ·Status: UNKNOWN ·Phase: NA
-
Retention, Chewing Efficiency and Masticatory Performance of Partial Dentures Opposing Implant Retained Prosthesis.
NCT05999760 ·Status: COMPLETED ·Phase: NA
-
Comparative Evaluation of Masticatory Efficiency of Implant Supported Overdenture
NCT05877092 ·Status: COMPLETED ·Phase: NA
-
Three Years Radiographic Evaluation of Different Implant Retained Complete Over Denture Attachments (In Vivo Study)
NCT06962358 ·Status: COMPLETED
-
Prosthetic Maintenance of Two Implant-Retained Overdentures Reinforced With PEKK Versus Co-Cr Frameworks
NCT06219811 ·Status: COMPLETED ·Phase: NA
-
Maintenance and Tissues Conditions of Fixed Screw-Retained Implant Prosthesis Versus Implant-Retained Ball Overdentures
NCT04708132 ·Status: COMPLETED ·Phase: NA
-
Effect of Open Tray Versus Digital Impressions on the Passivity and Prosthetic Complications of Full Arch Screw-retained Prosthesis
NCT04848207 ·Status: UNKNOWN ·Phase: NA
-
Patient Satisfaction for Digital Versus Conventional Maxillary Obturator
NCT05920811 ·Status: COMPLETED ·Phase: NA
-
Study of Wear in Composite Resin and Reinforced Acrylic Denture Teeth Used in Complete Denture Construction for Completely Edentulous Patients
NCT04839640 ·Status: COMPLETED ·Phase: NA