Comparison Between Acrylic and Soft Liner Telescopic Overdentures Regarding Patient Satisfaction
NCT03127033 · Status: UNKNOWN · Phase: NA · Type: INTERVENTIONAL · Enrollment: 6
Last updated 2017-04-25
Summary
Conventional complete overdenture will be made to ectodermal dysplasia patients, a week after delivery and after 3 months Patient satisfaction, retention and periodontal condition will be assessed. the denture will be taken from the patient for 2 weeks.Acrylic telescopes will be replaced with soft liner and again Patient satisfaction, retention and periodontal condition will be assessed a week after delivery and 3 months later.
Conditions
- Patient Satisfaction
- Retention
- Periodontal Health
Interventions
- OTHER
-
Soft liner telescopes
Soft liner telescopes: Overdenture will be adjusted by relieving acrylic opposite to the abutment about 2 mm using a metal stone. The relieved areas will be painted with an adhesive and the rest of the fitting surface of the denture will be painted with a separating medium. The soft liner (Silicone based soft liner, mollosil, chairside soft relining-long term, DETAX, Germany) will then be applied in the relieved areas to act as a secondary coping The base and catalyst will be mixed according to the manufacturer's instructions on a glass slab. The mix will be placed on the relieved area, seated in the patient's mouth, the patient is asked to bite in centric relation and the excess liner is removed with a lancet.
Sponsors & Collaborators
-
Cairo University
lead OTHER
Study Design
- Allocation
- NON_RANDOMIZED
- Purpose
- OTHER
- Masking
- NONE
- Model
- CROSSOVER
Eligibility
- Min Age
- 6 Years
- Max Age
- 40 Years
- Sex
- ALL
- Healthy Volunteers
- Yes
Timeline & Regulatory
- Start
- 2017-05-01
- Primary Completion
- 2017-08-01
- Completion
- 2017-11-01
More Related Trials
-
Compare the Difference in Occlusal Force Distribution and Denture Retention Using 2 Different Denture Base Materials in Implant Retained Overdenture
NCT07250503 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Accuracy of 3D Printed Maxillary Complete Dentures
NCT03613896 ·Status: UNKNOWN ·Phase: NA
-
Accuracy of 3D Printed Complete Dentures Using Two Impression Techniques: RCT
NCT04982510 ·Status: COMPLETED ·Phase: NA
-
Patient Satisfaction & Retention of Milled, 3D Printed and Conventional Complete Dentures
NCT03281603 ·Status: COMPLETED ·Phase: NA
-
Retention of Metal Reinforced Polyamide Denture Base and Heat Cured Acrylic Resin Denture Base in Complete Mandibular Denture
NCT03385746 ·Status: UNKNOWN ·Phase: NA
-
Comparative Study Between Acrylic and Flexible Dentures
NCT03184883 ·Status: UNKNOWN ·Phase: NA
-
Evaluation of Digital 3D Printed Temporary Removable Partial Denture.
NCT06106243 ·Status: RECRUITING ·Phase: NA
-
Study of Wear in Composite Resin and Reinforced Acrylic Denture Teeth Used in Complete Denture Construction for Completely Edentulous Patients
NCT04839640 ·Status: COMPLETED ·Phase: NA
-
Crestal Bone Loss in Mandibular Telescopic Overdentures. Overdenture with Milled Titanium, Milled Poly-ether Ketone Ketones and 3D Printed Chrome Cobalt Secondary Copings.
NCT06639893 ·Status: COMPLETED ·Phase: EARLY_PHASE1
-
PeriImplant Soft Tissue and Marginal Bone Loss of Single Implant Mandibular Overdenture
NCT02881905 ·Status: UNKNOWN ·Phase: NA
-
Comparative Evaluation of Masticatory Efficiency of Implant Supported Overdenture
NCT05877092 ·Status: COMPLETED ·Phase: NA
-
Comparison Between Single Implant Retained Partial Over-denture and Conventional Partial Denture
NCT03324789 ·Status: UNKNOWN ·Phase: NA
-
Digital Evaluation of Accuracy for Removable Partial Denture Frameworks
NCT06412159 ·Status: COMPLETED ·Phase: NA
-
Effect of Mini Implants Supported Over Dentures Versus Conventional Implant After Bone Expansion
NCT03326453 ·Status: UNKNOWN ·Phase: NA
-
Prosthetic Maintenance of Two Implant-Retained Overdentures Reinforced With PEKK Versus Co-Cr Frameworks
NCT06219811 ·Status: COMPLETED ·Phase: NA
-
Patient Satisfaction and Adaptation of Dentures Printed at 0 Versus 45 Degrees
NCT06164366 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
"Acrylic Vs. Metal Palatal Coverage in Complete Dentures: Patient-Reported Outcomes"
NCT06881199 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Patient Satisfaction and Dimensional Accuracy of Bre Flex and Peek for Removable Partial Dentures
NCT03025555 ·Status: UNKNOWN ·Phase: NA
-
3D-Printed Implant Overdentures: Comparing Impression Techniques
NCT07208812 ·Status: RECRUITING ·Phase: NA
-
Comparison of Conventional Versus 3-D Printed Complete Denture Regarding Retention, Accuracy, Elctromyographic Activity and Patient Satisfaction.
NCT05834530 ·Status: COMPLETED ·Phase: NA
-
Effect of Concentrated Growth Factors on Short Implant-Supported Overdentures
NCT06880965 ·Status: COMPLETED ·Phase: PHASE2/PHASE3
-
Single-retainer Lithium Di-silicate Versus Zirconia Resin Bonded Bridge for Replacement of an Anterior Missing Tooth.
NCT05861921 ·Status: COMPLETED ·Phase: NA
-
A Study Comparing Two Different Denture Base Materials in Implant Retained Overdentures
NCT07271641 ·Status: COMPLETED ·Phase: NA
-
Conventional Versus 3D Printing Duplication Techniques of Complete Denture
NCT06588140 ·Status: COMPLETED ·Phase: NA
-
"Patient Satisfaction with Intra-Oral Vs. Extra-Oral Scanned 3D-Printed Dentures: an in Vivo Study"
NCT06846619 ·Status: RECRUITING ·Phase: NA