Prosthetic Modality and MBL
NCT07156110 · Status: RECRUITING · Phase: NA · Type: INTERVENTIONAL · Enrollment: 60
Last updated 2025-09-04
Summary
The present study will test the effect of different prosthetic modalities on conical and internal hex connection implants, assessing the radiographic MBL changes after one year.
Consecutive patients fulfilling inclusion/exclusion criteria will enter the study. Once the implant is inserted, patients will be divided into three groups according to the time if their inclusion in the study.
Study groups (20 patients per group):
1. Group 1: Placing Lance Conical implant with a healing abutment. Three months later, after an impression, a screw-retained restoration will be seated using a Ti-Base abutment.
2. Group 2: Placing Lance+ (Internal Hex connection) implant with a healing abutment. Three months later, after an impression, a screw-retained restoration will be seated using a Ti-Base abutment.
3. Group 3: Placing Lance Conical implant together with Connect Abutment (tightened to 30 Ncm) with a Connect healing cap ("one time one abutment"). Screw retained restoration after 3 months.
Consecutive inclusion of patients - 1st- group 1, 2nd - group 2, 3rd - group 3 and vice versa.
Primary outcome variable: bone level changes 12 months post-loading
Conditions
- Bone Loss
Interventions
- PROCEDURE
-
Traditional prosthetic procedure
Three months later, after an impression, haling abutment will be removed and a screw-retained restoration will be seated using a Ti-Base abutment.
- PROCEDURE
-
one abutment-one time
Three months later, after an impression, a screw-retained restoration will be seated directly on the connect healing
Sponsors & Collaborators
-
Alessio Triestino
collaborator UNKNOWN -
Studio Odontoiatrico Associato Dr. P. Cicchese e L. Canullo
lead OTHER
Principal Investigators
-
luigi Canullo, prof · Studi Odontoiatrici Canullo
Study Design
- Allocation
- NON_RANDOMIZED
- Purpose
- TREATMENT
- Masking
- NONE
- Model
- PARALLEL
Eligibility
- Min Age
- 18 Years
- Sex
- ALL
- Healthy Volunteers
- Yes
Timeline & Regulatory
- Start
- 2025-09-01
- Primary Completion
- 2025-12-31
- Completion
- 2026-12-31
Countries
- Italy
Study Locations
More Related Trials
-
Differences Between Two Type Implants in Post-extraction Alveolus
NCT05665231 ·Status: COMPLETED ·Phase: NA
-
Socket Reconstruction Technique and Immediate Implant Placement With Two Different Bone Substitute Materials.
NCT06517030 ·Status: RECRUITING ·Phase: NA
-
Bacterial Microleakage and Bone Loss in Internal Connection Dental Implants Based on the Type of Abutment Used in Zirconia Partial Fixed Prosthesis: in Vivo Study
NCT06156111 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Immediate Implants Inserted Through Open Flap, Open Flap and Bone Grafting and Flapless Techniques
NCT03001752 ·Status: COMPLETED ·Phase: NA
-
Evaluation of Marginal Bone Loss and Associated Factors Around Ziacom Dental Implants With Different Prosthetic Connection
NCT05859113 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Primary Stability and Peri-implant Outcomes of Short Implants in Post-extraction Single-tooth Sites
NCT07177521 ·Status: RECRUITING ·Phase: NA
-
Evaluation of Bone Level Around Stark Conical Screw Implants With V-Blast Surface
NCT03455361 ·Status: COMPLETED
-
Passive Fit of Implant-Supported Complete-Arch Prostheses Using Digital Workflows
NCT07315620 ·Status: RECRUITING ·Phase: NA
-
Analysising the Marginal Bone Loss, Torque and Implant Stability Placed in Bone and Tissue Level Dental Implants
NCT07288606 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
A Triple-blinded Non-inferiority Multicentre Randomized Controlled Trial Comparing Hybrid and Fully Etched Implants P1
NCT06100120 ·Status: RECRUITING ·Phase: NA
-
Evaluation of Implant Stability Changes in Sites Prepared with Different Osseodensification Techniques: a Prospective Observational Clinical Study
NCT06679894 ·Status: COMPLETED
-
Bone Dimensional Changes at Different Implant-to-abutment Connections: a 1-year Clinical and Radiological Study
NCT01807416 ·Status: COMPLETED ·Phase: PHASE4
-
Stabilizing Mandibular Overdentures With a Single Implant Placed in the Canine Region of the Preferred Chewing Side
NCT06755034 ·Status: RECRUITING ·Phase: NA
-
Immediate Load of Dental Implants, Placed in Atrophic Upper and/or Lower Jaw of Partial or Complete Edentate Patients, According to Flapless Technique
NCT00136123 ·Status: COMPLETED ·Phase: NA
-
Two-unit Cantilever Implant Prostheses Made of Monolithic Zirconia or PFM
NCT04713800 ·Status: RECRUITING ·Phase: NA
-
Changes on the Interproximal Bone Level on Direct Prostheses or With Intermediate Abutments
NCT04369170 ·Status: UNKNOWN ·Phase: NA
-
Marginal Bone Loss in Single Implant Restaurations With Different Methods
NCT05301400 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Hybrid PEEK-Acrylic Resin Prostheses and the All-on-4 Concept for Full-Arch Rehabilitation - Routine Group
NCT05589493 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Clinical and Radiographic Outcomes of Implant-supported Prostheses With Cantilever Extensions After 10 Years of Function
NCT06534398 ·Status: COMPLETED
-
Evaluation of Using Different Screwed Abutment Height
NCT06017115 ·Status: COMPLETED ·Phase: NA
-
Immediate Load in Dental Implants Using Conventional Drilling and Piezoelectric Osteotomy on Aesthetic Zone.
NCT04497571 ·Status: UNKNOWN ·Phase: NA
-
Hybrid Polyetheretherketone (PEEK)-Acrylic Resin Prostheses and the All-on-4 Concept for Full Arch Rehabilitation
NCT04446078 ·Status: COMPLETED ·Phase: NA
-
Short Implants in Atrophic Posterior Maxilla
NCT06759246 ·Status: COMPLETED ·Phase: NA
-
Natural Dentition, Prosthesis and Antagonist Wear 3D Analysis
NCT05637619 ·Status: RECRUITING
-
Buccal and Palatal Bone Thickness and Marginal Bone Changes Implants
NCT05632172 ·Status: COMPLETED