MARGINAL BONE LEVELS AROUND IMPLANTS PLACED BY PARTIAL OR FULL-THICKNESS FLAP: A 3-YEAR RANDOMIZED CONTROLLED CLINICAL TRIAL
NCT06926101 · Status: COMPLETED · Phase: PHASE4 · Type: INTERVENTIONAL · Enrollment: 70
Last updated 2025-04-13
Summary
Each enrolled patient received one implant placed with the partial-thickness flap disconnect mode (PT Test Group) or the full-thickness flap disconnect mode (FT Control Group) from the same implant system (Anyridge, MegaGen Implant Co., Gyeongbuk, South Korea). Each implant was placed at 0.5 mm sub-crest as per protocol guidelines. This choice was made according to the current scientific literature. This implant system has specific macrostructural and microstructural techniques that allow high levels of standards. The fixture-abutment connection is internally conical at 2.8 mm with 5° indexing: this feature makes it possible to reduce the prosthetic microgap, move the platform away from the bone margin while maintaining an optimal crestal margin and prevent rotation or unscrewing of the prosthetic component. Each implant was placed at 1 mm sub-crest as per protocol guidelines. This choice was made according to the current scientific literature.
Conditions
- Dental Implant
- Dental Implant Therapy
- Edentulism
Interventions
- DEVICE
-
dental implants
dental implant placement by full or partial thickness flap
Sponsors & Collaborators
-
University of Milan
lead OTHER
Study Design
- Allocation
- RANDOMIZED
- Purpose
- TREATMENT
- Masking
- SINGLE
- Model
- PARALLEL
Eligibility
- Min Age
- 18 Years
- Max Age
- 80 Years
- Sex
- ALL
- Healthy Volunteers
- No
Timeline & Regulatory
- Start
- 2019-01-01
- Primary Completion
- 2024-06-30
- Completion
- 2024-07-31
Countries
- Italy
Study Locations
More Related Trials
-
Buccal and Palatal Bone Thickness and Marginal Bone Changes Implants
NCT05632172 ·Status: COMPLETED
-
Efficacy of Implant Surface Characteristics in Patients With History of Periodontitis
NCT05010382 ·Status: COMPLETED ·Phase: NA
-
Dimensional Changes of Peri-implant Facial Bone
NCT01821092 ·Status: COMPLETED ·Phase: PHASE4
-
Effect of PEEK and Co-Cr Framework Reinforcement on Marginal Bone Loss Around Implants Supporting a Fixed All-on-four Prosthesis in Completely Edentulous Mandibles. A Randomized Controlled Clinial Trial
NCT06591611 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Effect of L-PRF on Implant Stability and Marginal Bone Levels.
NCT06516263 ·Status: RECRUITING ·Phase: NA
-
A Randomized Controlled Clinical Trial to Assess Crestal Bone Remodeling of Four Different Implant Designs
NCT06821308 ·Status: COMPLETED ·Phase: NA
-
Evaluation of Bone Level Around Stark Conical Screw Implants With V-Blast Surface
NCT03455361 ·Status: COMPLETED
-
Clinical Performance of Dentals Implants With Hydrophilic or Hydrophobic Surfaces
NCT04605016 ·Status: UNKNOWN ·Phase: NA
-
Compare the Difference in Occlusal Force Distribution and Denture Retention Using 2 Different Denture Base Materials in Implant Retained Overdenture
NCT07250503 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Trans-gingival or Subcrestal Short Implants Posterior Maxilla Bone Changes
NCT05975138 ·Status: COMPLETED
-
Analysising the Marginal Bone Loss, Torque and Implant Stability Placed in Bone and Tissue Level Dental Implants
NCT07288606 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Comparative Evaluation Between One-piece and Two-piece Implants Supporting Mandibular Screw-retained All-On-Four Full-arch Prosthesis on Peri-implant Bone Changes.
NCT06790524 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Partially-guided Protocol for Maxillary Overdentures Retained by Ti-Zr One-piece Mini Implants
NCT06081192 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Changes on the Interproximal Bone Level on Direct Prostheses or With Intermediate Abutments
NCT04369170 ·Status: UNKNOWN ·Phase: NA
-
Effect of Implant Thread Design on Implant Stability Quotient (ISQ) in Early Healing Period
NCT02701387 ·Status: COMPLETED ·Phase: NA
-
Effect of Soft Tissue Augmentation With an Acellular Dermal Matrix in Marginal Bone Levels Around Implants
NCT05156294 ·Status: ACTIVE_NOT_RECRUITING ·Phase: PHASE3
-
Evaluation of Implant Stability Changes in Sites Prepared with Different Osseodensification Techniques: a Prospective Observational Clinical Study
NCT06679894 ·Status: COMPLETED
-
SFI Bars and Milled Bars Supporting Mandibular Overdentures. Three-year Randomized Clinical Trial
NCT06620497 ·Status: COMPLETED ·Phase: NA
-
Bone Level Tapered Multi-Center Study
NCT02569671 ·Status: COMPLETED ·Phase: NA
-
Dental Implant Stability Placed in Healed Bony Sites Using Oversized Drilling Versus Conventional Drilling Protocol
NCT06917638 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Comparison Between Single Implant Retained Partial Over-denture and Conventional Partial Denture
NCT03324789 ·Status: UNKNOWN ·Phase: NA
-
Implant-Abutment Interface Design on Bone and Soft Tissue Levels Around Implants Placed Using Different Transcrestal Sinus Floor Elevation
NCT02953392 ·Status: COMPLETED ·Phase: NA
-
Milled in Versus Round Bar for Mini-implant Retained Mandibular Overdentures
NCT06185283 ·Status: COMPLETED ·Phase: NA
-
A Cost-effectiveness Analysis of the Single-implant Mandibular Overdenture Treatment
NCT02710357 ·Status: COMPLETED ·Phase: NA
-
A Study Comparing Two Different Denture Base Materials in Implant Retained Overdentures
NCT07271641 ·Status: COMPLETED ·Phase: NA