The Effect of Clip Material on the Retention of Implant Supported Mandibular Overdenture
NCT06866067 · Status: COMPLETED · Phase: NA · Type: INTERVENTIONAL · Enrollment: 12
Last updated 2025-03-10
Summary
This study is aiming to evaluate the retention of implant supported mandibular overdenture using two different clip materials namely polyoxymethylene (POM) and poly-ether-ether-ketone (PEEK) on PEEK bar at three-time intervals; immediately after placement, after 3 months and after 6 months.
Conditions
- Denture Retention
Interventions
- DEVICE
-
PEEK clip
The overdentures were attached with PEEK clip . The retention of overdenture was assessed
- DEVICE
-
Nylon clip
The overdentures were attached with Nylon clip . The retention of overdenture was assessed
Sponsors & Collaborators
-
MTI University
lead OTHER
Study Design
- Allocation
- RANDOMIZED
- Purpose
- TREATMENT
- Masking
- NONE
- Model
- PARALLEL
Eligibility
- Min Age
- 50 Years
- Max Age
- 60 Years
- Sex
- MALE
- Healthy Volunteers
- No
Timeline & Regulatory
- Start
- 2024-02-01
- Primary Completion
- 2024-06-01
- Completion
- 2024-09-01
Countries
- Egypt
Study Locations
More Related Trials
-
Comparative Evaluation of Masticatory Efficiency of Implant Supported Overdenture
NCT05877092 ·Status: COMPLETED ·Phase: NA
-
A Study Comparing Two Different Denture Base Materials in Implant Retained Overdentures
NCT07271641 ·Status: COMPLETED ·Phase: NA
-
Retention of Peek and Bre.Flex Materials Maxillary Bilateral Bounded Removable Partial Dentures
NCT03025568 ·Status: UNKNOWN ·Phase: NA
-
Occlusion and Disocclusion Time in Immediately Loaded Overdentures Supported by Two Splinted Versus Non Splinted Interforaminal Implants
NCT06376019 ·Status: COMPLETED ·Phase: NA
-
Crestal Bone Loss in Mandibular Telescopic Overdentures. Overdenture with Milled Titanium, Milled Poly-ether Ketone Ketones and 3D Printed Chrome Cobalt Secondary Copings.
NCT06639893 ·Status: COMPLETED ·Phase: EARLY_PHASE1
-
(PEEK) Housing Verses Metallic Housing of Ball and Socket Attachment on Retention of Mandibular Overdenture
NCT02950662 ·Status: UNKNOWN ·Phase: NA
-
Comparing Marginal Bone Loss for Immediately Loaded Implants in Maxillary Full Arch Interim Prosthesis Using Welded Titanium Bar Versus Polyetheretherketone Bar
NCT06127017 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Comparative Study of Biting Force of Injection Molded PEEK and Bre.Flex for Removable Partial Dentures.
NCT03038737 ·Status: UNKNOWN ·Phase: NA
-
Surface Topography and Color Stability of Implant Supported 3D Printed Provisional Restorations
NCT06947070 ·Status: RECRUITING ·Phase: NA
-
Assessment of Osseointegration Properties of Nano-Hydroxy Apatite Coated Titanium Implant
NCT05936775 ·Status: COMPLETED ·Phase: NA
-
Comparing Cobalt-Chromium Versus PEEK Secondary Telescopic Crowns on Implant Retained Mandibular Overdenture.
NCT06637930 ·Status: COMPLETED ·Phase: NA
-
Mandibular Implant Overdenture With OT Cap Bar vs Bar Attachment
NCT07067190 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
To Evaluate the Complete Mandibular Dentures Produced Via 3D Printing in Comparison to Those Constructed From Metal-reinforced Acrylic Resin Regarding Their Retention
NCT07061860 ·Status: COMPLETED ·Phase: NA
-
Evaluation of Chewing Efficiency of Conventional Complete Denture in Comparison to Reinforced Poly Amide Denture
NCT03391063 ·Status: UNKNOWN ·Phase: NA
-
Measurement of the Biting Force of Rabid Heat Cured Acrylic Resin Versus Modified Conventional Acrylic
NCT03006757 ·Status: UNKNOWN ·Phase: NA
-
Effect of Concentrated Growth Factors on Short Implant-Supported Overdentures
NCT06880965 ·Status: COMPLETED ·Phase: PHASE2/PHASE3
-
Short Implant Versus Crestal Standard Length Implant to Retain Class 1 Removable Partial Denture.
NCT06666595 ·Status: RECRUITING ·Phase: NA
-
Effect of Different Implant Surface Treatments on Bony Changes Around Mandibular Implants
NCT04686370 ·Status: UNKNOWN ·Phase: NA
-
Immediate Versus Delayed Loading for Implants Retaining Mandibular Complete Overdenture
NCT05620797 ·Status: COMPLETED ·Phase: NA
-
Comparative Evaluation Between One-piece and Two-piece Implants Supporting Mandibular Screw-retained All-On-Four Full-arch Prosthesis on Peri-implant Bone Changes.
NCT06790524 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Using Two Different Attachments in Mandibular Implant Overdenture Cases in Order to Retention and Patient Satisfaction
NCT06678945 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Retention of Maxillary Complete Dentures Modified With Titanium Dioxide Nanoparticles: A Randomized Crossover Clinical Trial.
NCT04991064 ·Status: COMPLETED ·Phase: NA
-
Patient Satisfaction and Maximum Biting Force in Co-Cr Bar Implant Overdenture
NCT06401187 ·Status: COMPLETED ·Phase: NA
-
Effect of Implant Position on Clinical Outcomes
NCT06166316 ·Status: COMPLETED ·Phase: NA
-
Evaluation of Peri-Implant Tissues of Different Implant Assisted Overdentures
NCT06647199 ·Status: COMPLETED ·Phase: NA