Evaluation of Open-face Maxillary Complete Denture for Patients With Prominent Premaxilla
NCT06209814 · Status: COMPLETED · Phase: NA · Type: INTERVENTIONAL · Enrollment: 38
Last updated 2024-01-18
Summary
The aim of the present study was to evaluate open faced maxillary complete denture with soft acryl resin wing versus conventional heat cured maxillary complete denture regarding the retention and patient satisfaction.
Conditions
- Edentulous Jaw
Interventions
- DEVICE
-
Conventional denture
Patients in this group received conventional maxillary and mandibular complete dentures. The patients used these dentures for 45 days. Then, the conventional maxillary denture was replaced by open faced denture with soft acryl resin wing.
- DEVICE
-
Maxillary open-faced denture
Patients in this group received a maxillary open faced denture with soft acryl resin wing and a conventional mandibular complete denture. The patients used these dentures for 45 days. Afterward, the maxillary open-faced denture was replaced by one with a conventional construction.
Sponsors & Collaborators
-
haitham ahmed hassan ismail
lead OTHER
Principal Investigators
-
Haitham A Ismail, MSc · Alexandria University
-
Ingy S Soliman, PhD · Alexandria University
-
Muhammed B El-Danasory, PhD · Alexandria University
-
Salma S Abolgheit, PhD · Alexandria University
Study Design
- Allocation
- RANDOMIZED
- Purpose
- TREATMENT
- Masking
- DOUBLE
- Model
- CROSSOVER
Eligibility
- Min Age
- 45 Years
- Max Age
- 65 Years
- Sex
- ALL
- Healthy Volunteers
- No
Timeline & Regulatory
- Start
- 2022-10-01
- Primary Completion
- 2023-10-05
- Completion
- 2023-10-05
Countries
- Egypt
Study Locations
More Related Trials
-
Comparison of Patient Satisfaction and Chewing Efficiency Between Conventional and 3D Printed Complete Dentures.
NCT06103019 ·Status: COMPLETED ·Phase: NA
-
Compare the Difference in Occlusal Force Distribution and Denture Retention Using 2 Different Denture Base Materials in Implant Retained Overdenture
NCT07250503 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Compressive Single-piece Implants for Immediate Rehabilitation of Edentulous Maxillectomy Patients
NCT06572891 ·Status: COMPLETED ·Phase: NA
-
Patient Satisfaction and Microbial Changes in Complete Dentures.
NCT03043456 ·Status: UNKNOWN ·Phase: NA
-
Comparative Evaluation of Masticatory Efficiency of Implant Supported Overdenture
NCT05877092 ·Status: COMPLETED ·Phase: NA
-
Comparison Between Single Implant Retained Partial Over-denture and Conventional Partial Denture
NCT03324789 ·Status: UNKNOWN ·Phase: NA
-
Complete Digital Workflow for Construction of Full Arch Implant Supported Screw Retained Restoration
NCT06332482 ·Status: COMPLETED ·Phase: NA
-
Retention, Chewing Efficiency and Masticatory Performance of Partial Dentures Opposing Implant Retained Prosthesis.
NCT05999760 ·Status: COMPLETED ·Phase: NA
-
Patient Satisfaction for Digital Versus Conventional Maxillary Obturator
NCT05920811 ·Status: COMPLETED ·Phase: NA
-
Comparison of Conventional Versus 3-D Printed Complete Denture Regarding Retention, Accuracy, Elctromyographic Activity and Patient Satisfaction.
NCT05834530 ·Status: COMPLETED ·Phase: NA
-
Evaluation of Patient Satisfaction After the Construction of Maxillary Obturator Prosthesis for Limited Mouth Opening in Maxillofacial Cases : Cross Over Randomized Clinical Trial
NCT07079384 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Prosthetic Maintenance of Two Implant-Retained Overdentures Reinforced With PEKK Versus Co-Cr Frameworks
NCT06219811 ·Status: COMPLETED ·Phase: NA
-
Assessment of Wear and Muscular Efficiency of 3D Printed Versus Conventional Denture Teeth: A Cross-Over In Vivo Study
NCT07035574 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Effect of Fixed and Removable Space Maintainer on Some Salivary Parameters: An In-Vivo Study
NCT06147609 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Patient's Satisfaction of Mandibular Implant Supported Overdentures With Reduced Denture Base Extensions.
NCT06850558 ·Status: COMPLETED ·Phase: NA
-
Conventional Versus 3D Printing Duplication Techniques of Complete Denture
NCT06588140 ·Status: COMPLETED ·Phase: NA
-
Using Flexible Resin in Maxillary Obturators
NCT02482064 ·Status: COMPLETED ·Phase: NA
-
Accuracy of 3D Printed Maxillary Complete Dentures
NCT03613896 ·Status: UNKNOWN ·Phase: NA
-
Two Versus Four Implant-supported Fixed Full-arch Prosthesis
NCT05290766 ·Status: COMPLETED ·Phase: NA
-
Single vs. Two Implants for Mandibular Overdentures
NCT06599450 ·Status: COMPLETED ·Phase: NA
-
Accuracy of Fully Guided Versus Half Guided Implant
NCT06542562 ·Status: COMPLETED ·Phase: NA
-
Evaluation of Masticatory Performance and Patient Satisfaction for Conventional and 3D Printed Implant Overdentures
NCT06148727 ·Status: COMPLETED ·Phase: NA
-
Retention, Stability and Performance Assessment of Denture Fixatives Versus no Fixative Control
NCT05689814 ·Status: COMPLETED ·Phase: NA
-
Using Two Different Attachments in Mandibular Implant Overdenture Cases in Order to Retention and Patient Satisfaction
NCT06678945 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Single-retainer Lithium Di-silicate Versus Zirconia Resin Bonded Bridge for Replacement of an Anterior Missing Tooth.
NCT05861921 ·Status: COMPLETED ·Phase: NA