Modified 3d Rectangular Grid Plate for Fixation of Anterior and Body Mandibular Fractures
NCT07590401 · Status: COMPLETED · Phase: NA · Type: INTERVENTIONAL · Enrollment: 22
Last updated 2026-05-15
Summary
Background: Fractures of anterior mandible (symphysis and parasymphysis) make up about 9% to 57%, of mandibular fractures, and body fractures make up about 21%; posing challenges for stabilization due to anatomical constraints. Traditional 3D plates have limitations in this area, leading to the development of Modified 3D Rectangular Grid plates. Studies have shown that these plates offer superior stabilization over larger configurations while maintaining a low profile like miniplates. Additionally, design modifications ensure mental nerve preservation, balancing effective fixation with neurovascular safety.
Aim of this study: To evaluate the use of Modified 3D Rectangular Grid plates in comparison with conventional mini plates for fixation of mandibular fracture in the anterior and body regions, clinically regarding pain, interfragmentary mobility, maximal inter-incisal opening, wound healing, and sensory nerve evaluation, and radiographically regrading fracture reduction.
Conditions
- Mandibular Fracture
Interventions
- OTHER
-
Modified 3D Rectangular Grid plate
The system consists of a lower 1.5-mm rectangular plate and an upper linear plate that interlock through circular recesses and elevations. Each component is 0.75 mm thick at the junction, giving a total thickness of 1.5 mm. After screw fixation, it provides 3D stability similar to standard 3D plates while minimizing risk to the mental nerve.
- OTHER
-
Two conventional miniplates
conventional mini plates for fixation of mandibular fracture in the anterior and body regions
Sponsors & Collaborators
-
Alexandria University
lead OTHER
Study Design
- Allocation
- RANDOMIZED
- Purpose
- TREATMENT
- Masking
- NONE
- Model
- PARALLEL
Eligibility
- Min Age
- 20 Years
- Max Age
- 50 Years
- Sex
- ALL
- Healthy Volunteers
- No
Timeline & Regulatory
- Start
- 2025-03-02
- Primary Completion
- 2026-02-07
- Completion
- 2026-02-07
Countries
- Egypt
Study Locations
More Related Trials
-
Three-Dimensional Printing and Three-Dimensional Miniplates in Treatment of Anterior Mandibular Fractures
NCT06898736 ·Status: COMPLETED ·Phase: NA
-
Evaluation of Patient-specific Surgical Stents and Plates for Guided Reduction And Fixation of Mandibular Angle Fractures
NCT07375030 ·Status: COMPLETED ·Phase: PHASE4
-
Patient Specific Plates Versus Conventional Miniplates for Treatment of Mandibular Body Fractures
NCT03608891 ·Status: UNKNOWN ·Phase: NA
-
Radiographic and Clinical Evaluation of Three-Dimensional Delta Plate in Internal Fixation of Mandibular Sub-condylar Fractures.
NCT07311239 ·Status: COMPLETED ·Phase: NA
-
A Comparative Study Between Three Different Plating Techniques in Management of Mandibular Parasymphyseal Fractures.
NCT06323122 ·Status: COMPLETED
-
Evaluation of the Accuracy of 3d Printed Reduction Guide in Treatment of Mandibular Fractures Using Two Different Methods of Virtual Planning
NCT07385924 ·Status: COMPLETED ·Phase: PHASE4
-
Customized z Shaped Miniplate Versus Standard 2 Miniplates for Fixation of Parasymphyseal/Body Mandibular Fractures
NCT07094867 ·Status: COMPLETED ·Phase: NA
-
Comparative Study Evaluating Stability of Fracture Segments After Treatment of Mandibular Angle Fracture With 3d Strut Plate With or Without IMMF.
NCT03640039 ·Status: UNKNOWN ·Phase: NA
-
Inter Flex Three Dimensional Plate in Management of Mandibular Fracture RCT
NCT07263893 ·Status: RECRUITING ·Phase: NA
-
Evaluation of Z-shaped Bone Plates in Management of Mandibular Fractures
NCT07184762 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Comparison of Double Y-shaped Plates and Lag Screws in Fixation of Anterior Mandibular Fractures
NCT04396054 ·Status: COMPLETED ·Phase: NA
-
z Mini-plate With Lingual Extension Versus Conventional 2 Mini Plates
NCT06898710 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Three Dimensional Versus Standard Miniplate In Fixation Of Mandibular Angle Fracture- A Prospective Randomized Controlled Clinical Trial
NCT01939015 ·Status: COMPLETED ·Phase: NA
-
Evaluation of Customized V Plate Versus Conventional Miniplates of Mandibular Angle Fracture
NCT03761524 ·Status: UNKNOWN ·Phase: NA
-
Patient-specific Reconstruction Plate for Segmental Mandibular Defects
NCT07320924 ·Status: RECRUITING ·Phase: NA
-
Custom-Made 3D PEEK for Fixation of Mandibular Angle Fractures.
NCT07156812 ·Status: COMPLETED ·Phase: PHASE4
-
Fixation of Mandibular Angle Fracture Using 3D Titanium Miniplate Versus Standard Two Plate Fixation
NCT07574554 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Finite Element and z Shap Mini Plate With Lingual Extension
NCT06899568 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Single Locking Miniplate and Two Non-locking Miniplates in the Management of Parasymphyseal Fracture
NCT03747666 ·Status: UNKNOWN ·Phase: NA
-
Posterior Mandibular Ridge Augmentation Using Mineralized Plasmatic Matrix Versus Autogenous Bone Graft
NCT02998632 ·Status: UNKNOWN ·Phase: NA
-
Accuracy of Computer Guided Screw Holes Locating Guide and Patient Specific Champy Plate vs Conventional Champy Plate Osteosynthesis in Management of Mandibular Angle Fracture: Randomized Controlled Trial
NCT06838377 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Evaluation of Modified Omega Plate in the Management of Mandibular Fractures Compared With Conventional Fixation
NCT07206134 ·Status: COMPLETED ·Phase: NA
-
V Shaped Plate Vs Champy Technique in Mandibular Angle Fractures
NCT06005467 ·Status: UNKNOWN ·Phase: NA
-
Evaluation of Accuracy of Patient-Specific Plate for Reduction and Fixation of Mandibular Angle Fracture
NCT07231042 ·Status: COMPLETED ·Phase: NA
-
Additive Versus Subtractive Manufacturing Techniques of Custom-Made Plates for the Fixation of Interforaminal Mandibular Fractures
NCT07263633 ·Status: COMPLETED ·Phase: NA