Oval Abutment Versus a Circular Abutment in Dental Implants in the Anterior Maxillae
NCT05642520 · Status: COMPLETED · Phase: NA · Type: INTERVENTIONAL · Enrollment: 40
Last updated 2023-07-27
Summary
Objetive: The main objective of this clinical trial is to assess whether the oval section abutment of a 2.9mm implant achieves a greater covering of the tooth-implant papilla compared to a circular section abutment in 3.3mm implants in upper lateral incisors and lower central / lateral incisors.
Material and methods: fourty patients received unitary implants of 3.3mm or 2.9 mm diameter to replace the absence of upper lateral incisor or lower central/lateral incisor with an edentulous space of at least 6.4mm (mesio-distally). Esthetic and clinical parameters were evaluated 12 months after installation of the prosthesis.
Condition or disease: dental implants
Intervention/treatment: 3.3 or 2.9 mm diameter dental implants
Phase: Not Applicable
Conditions
- Dental Implants
Interventions
- PROCEDURE
-
Oval section abutment of 2.9 mm
The choice of the diameter to be used as recommended by the manufacter, was determined by the mesiodistal width between the two adjacent natural teeth, in order to maintain at least 1.5mm between the implant and the adjacent tooth. When said the distance was between 5.9 and 6.3 mm, a 2.9 mm implant was placed. Implant designs are made of a titanium and zirconium alloy (Roxolid®) with a SLActive® surface (Institut Straumann AG, Basel, Switzerland).
- PROCEDURE
-
Circular section abutment of 3.3 mm
The choice of the diameter to be used as recommended by the manufacter, was determined by the mesiodistal width between the two adjacent natural teeth, in order to maintain at least 1.5mm between the implant and the adjacent tooth. When said the distance was between 6.4 and 7.1 mm, a 3.3 mm implant was placed. Implant designs are made of a titanium and zirconium alloy (Roxolid®) with a SLActive® surface (Institut Straumann AG, Basel, Switzerland).
Sponsors & Collaborators
-
Ana María García de la Fuente
lead OTHER
Principal Investigators
-
ANA MARIA GARCIA DE LA FUENTE, PhD · University of the Basque Country (UPV/EHU)
Study Design
- Allocation
- NON_RANDOMIZED
- Purpose
- TREATMENT
- Masking
- TRIPLE
- Model
- PARALLEL
Eligibility
- Min Age
- 18 Years
- Sex
- ALL
- Healthy Volunteers
- Yes
Timeline & Regulatory
- Start
- 2018-02-01
- Primary Completion
- 2023-02-01
- Completion
- 2023-03-01
Countries
- Spain
Study Locations
More Related Trials
-
Comparative Aesthetic Analysis Between Titanium and Ceramic Implants
NCT04707677 ·Status: COMPLETED ·Phase: NA
-
Comparative Clinical Study of Conventional vs Customized Healing Abutments in Dental Implantology
NCT07031232 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Standard Implants With Bone Regeneration vs Short Implants
NCT03524885 ·Status: UNKNOWN ·Phase: NA
-
Multicentre Study on the Impact of Transmucosal Abutment Surface Characteristics on Peri-implant Tissues.
NCT07246499 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Marginal Bone Level Around Implants With Definitive Abutments
NCT04230837 ·Status: COMPLETED ·Phase: NA
-
Comparison of Abutments Engagement Configurations in Implant Supported Fixed Partial Dentures
NCT06715722 ·Status: RECRUITING ·Phase: NA
-
Atraumatic Zirconia Abutment Versus Customized Composite Healing Abutment in Maxilla or Mandible.
NCT05748379 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Extra-short vs. Non-extra-short Dental Implants Splinted on the Same Prosthesis
NCT04927819 ·Status: RECRUITING
-
Influence of the Implant-prosthetic Connection in the Marginal Bone Loss and Bacterial Leakage
NCT04328051 ·Status: UNKNOWN ·Phase: NA
-
Implant/Abutment Module Stability of Original vs Compatible Connections
NCT03524872 ·Status: UNKNOWN ·Phase: NA
-
Impact of Abutment Screw Torque on Marginal Bone Loss
NCT07234552 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Marginal Bone Remodeling at Monolithic Zirconia Full-Arch Prostheses in the Maxilla and Mandible
NCT07323290 ·Status: COMPLETED
-
Dimensional Changes of Peri-implant Tissue in Immediate Implants With Individualized Healing Abutments
NCT06455436 ·Status: RECRUITING ·Phase: NA
-
Analysising the Marginal Bone Loss, Torque and Implant Stability Placed in Bone and Tissue Level Dental Implants
NCT07288606 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
In-patient Comparison of Immediately Loaded and Non-loaded Submerged and Transgingival Healed Implants Within 4 Months
NCT06408506 ·Status: COMPLETED ·Phase: NA
-
Results of a New Fully Tapered Implant at One Year
NCT05187143 ·Status: COMPLETED
-
Zygomatic Versus Conventional Dental Implants in Augmented Maxillae
NCT01961284 ·Status: WITHDRAWN ·Phase: NA
-
Longitudinal Efficacy of Dental Implants in Anterior Areas
NCT00641277 ·Status: COMPLETED
-
Periimplant Bone Changes in Different Abutment Heights and Insertion Timing in Posterior Mandibular Areas
NCT04340726 ·Status: COMPLETED ·Phase: NA
-
A Randomized Controlled Clinical Trial to Assess Crestal Bone Remodeling of Four Different Implant Designs
NCT06821308 ·Status: COMPLETED ·Phase: NA
-
SA Versus SOI Surfaces for Single Implant-supported Crown
NCT04073654 ·Status: UNKNOWN ·Phase: NA
-
Influence of the Implant Connection on Facial Tissues Maturation
NCT04160689 ·Status: COMPLETED ·Phase: PHASE4
-
Implant Survival After Insertion of Bone Level Tapered (BLT) Implant Ø 2.9 mm in the Clinical Practice Setting
NCT02699866 ·Status: COMPLETED ·Phase: NA
-
Aesthetic Outcomes of Single Tooth Implant-supported Restorations in the Anterior Maxilla With Either White Zirconia or Fluorescent White Zirconia Abutments
NCT05475249 ·Status: COMPLETED ·Phase: NA
-
Assessment of Integration Success of an Implant System With a Novel Abutment Attachment Design in Early Loaded Cases
NCT01529814 ·Status: COMPLETED ·Phase: NA