An Automatically Adjusting Prosthetic Socket for People With Transtibial Amputation
NCT05124652 · Status: RECRUITING · Phase: NA · Type: INTERVENTIONAL · Enrollment: 100
Last updated 2026-05-07
Summary
People with leg amputations often experience daily changes in the size (volume) of their residual limb. These daily changes can cause a prosthesis to fit poorly. They can also cause limb problems like pain or skin breakdown. Prosthetic socket systems that accommodate limb volume changes can help address these issues, but they require users to make adjustments throughout the day. The aim of this research is to create a system that will automatically adjust the fit of the socket and create a well-fitting prosthesis for people with leg amputations who experience volume fluctuations when using their prosthesis.
Conditions
- Lower Limb Amputation Below Knee (Injury)
- Diurnal Residual Limb Fluid Volume Fluctuation
Interventions
- DEVICE
-
Auto Adjusting Prosthesis
Participants will test the auto adjusting prosthesis. The prosthesis will be able to move up to 3 panels built into the socket walls to expand or tighten the socket's fit. The auto adjustments will take place during periods of sitting, standing, or walking. Manual adjustments will also be possible either via the researcher controlling the prosthesis or via the key fob developed in the first aim.
Sponsors & Collaborators
-
Eunice Kennedy Shriver National Institute of Child Health and Human Development (NICHD)
collaborator NIH - lead OTHER
Principal Investigators
-
Joan E Sanders, PhD · University of Washington
Study Design
- Allocation
- RANDOMIZED
- Purpose
- BASIC_SCIENCE
- Masking
- NONE
- Model
- CROSSOVER
Eligibility
- Min Age
- 18 Years
- Sex
- ALL
- Healthy Volunteers
- Yes
Timeline & Regulatory
- Start
- 2021-10-18
- Primary Completion
- 2027-03-31
- Completion
- 2027-06-30
- FDA Device
- Yes
Countries
- United States
Study Locations
More Related Trials
-
Prosthetic Limbs After Leg Amputation: Alternative Method of Socket Design
NCT00061217 ·Status: UNKNOWN ·Phase: PHASE2
-
Low Cost Socket for Lower Limb Amputees
NCT04725461 ·Status: COMPLETED ·Phase: NA
-
Lower Limb Prostheses for Individuals Who Carry Infants, Toddlers, and Other Loads
NCT07159490 ·Status: COMPLETED ·Phase: NA
-
Feasibility Study on Using Smart Templates, That Link Rectification Approaches to Particular Patient Characteristics, for Transtibial Prosthetic Socket Fitting
NCT06597266 ·Status: COMPLETED ·Phase: NA
-
Bioimpedance as a Diagnostic Tool for Assessing the Need for Socket Modification in Transtibial Amputees
NCT03164356 ·Status: COMPLETED ·Phase: NA
-
E-Socket, Diagnostic Monitoring
NCT06432335 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Prosthetic Smart Socket Technology to Improve Patient Interaction, Usability, Comfort, Fit, and Function.
NCT03199222 ·Status: UNKNOWN ·Phase: NA
-
Study to Determine if Different Prosthetic Sockets Effect How Much Oxygen is in the Tissue of Lower Limb Amputees While They Are Walking
NCT00985842 ·Status: COMPLETED ·Phase: NA
-
Optimizing Prosthetic Prescription to Mitigate the Effects of Perspiration
NCT07024342 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Limb Health and Socket Pressure in Response to Powered Ankle Protheses
NCT05112679 ·Status: COMPLETED ·Phase: NA
-
Adherence and Perspiration While Wearing Lower Limb Prostheses
NCT03900845 ·Status: COMPLETED ·Phase: NA
-
Reduction of Shear Forces Using Semi-flexible Sockets on Transtibial Amputees
NCT03390153 ·Status: COMPLETED ·Phase: NA
-
Computational Design, Fabrication, and Evaluation of Optimized Patient-Specific Transtibial Prosthetic Sockets
NCT03544853 ·Status: COMPLETED ·Phase: NA
-
Improving Socket Fit in Female and Male Veterans With Transtibial and Transfemoral Amputation
NCT05989243 ·Status: RECRUITING
-
Vacuum Suspension: Effects on Tissue Oxygenation, Activity and Fit
NCT00117793 ·Status: COMPLETED ·Phase: NA
-
Influence of Prosthetic Foot Stiffness on Transtibial Osseointegrated Bone-Anchored Limb Outcomes
NCT07263945 ·Status: RECRUITING ·Phase: PHASE1
-
Automatic Prosthetic Foot Stiffness Modulation to Improve Balance
NCT06711588 ·Status: RECRUITING ·Phase: NA
-
Effect of Socket Wall Height With Vacuum Suspension for Above Knee Amputees
NCT01559909 ·Status: COMPLETED ·Phase: PHASE1
-
Stability and 3D Motion Study of an Experimental Prosthetic Foot
NCT00968292 ·Status: UNKNOWN ·Phase: PHASE3
-
Comparing Active and Passive Ankle-foot Prostheses
NCT01684501 ·Status: COMPLETED
-
Pivot-Flex Foot: Optimal Coupling Ratio Between Transverse and Sagittal-plane Motions Using a Torsionally Adaptive Prosthesis for Individuals With Lower Limb Amputation
NCT03532100 ·Status: COMPLETED ·Phase: NA
-
Socket Geometry and Clinical Outcomes of Manual vs Digital Sockets for Lower-limb Amputees
NCT06504303 ·Status: COMPLETED ·Phase: NA
-
Evaluation of a Pro-Active Dynamic Accommodating Socket
NCT01546311 ·Status: UNKNOWN
-
Evaluation of Limb Health Associated With a Prosthetic Vacuum Socket System
NCT01839123 ·Status: UNKNOWN ·Phase: NA
-
Biomechanical Assessment of Gait in Lower-Extremity-Amputees
NCT01332123 ·Status: COMPLETED ·Phase: NA