Effectiveness Basket Wires for the Maintenance of Stone and Pneumatic Probe in the Treatment of Ureteral Stones

Summary

Patients included in the study included the necessary tests U / A, K, Na, Cr, BUN, CBC, And U / C was checked and anesthesia counseling was done. Patients were prepared for action. The demographic and clinical data of the patients, including age, sex, size, and location of the stones were recorded.

Then patients as random allocation were divided into two groups: A (control group, no basket of bases and group B (use of pneumatic synchronous buccal waist). The dividing person and the patients themselves were not aware of which group they were in. They were double-blind was.

In each group, ureteroscopy was performed using a standard F9.5 ureteroscope. After reaching the rock in group A (control), the probe of the pneumatic crusher was passed through the working channel of the ureteroscope and began crushing the rock.

During the crushing process, the minimum flow of water, flattening and the single-shot impact was used to minimize the stone's retropulsion.

In group B (using a basket of wires3F) the helical type was passed through the four wires of the working channel of the ureteroscope and routed to the proximal part of the rock, and the stone was routed to the bowl, then the stone was ducted The gasket was kept, and the probe of the pneumatic crusher also passed through the working channel and proceeded to break it down. Conditions were observed during the stomach as the control group. Ureteroscopic crushing was performed by a urologist in both groups under similar technical conditions. Findings during and after the completion of crushing include the success, stone retropulsion or parts larger than 3 mm, which requires secondary measures (SWL - ureter stenting, resection ureteroscopy), the duration of stone breakdown and traumatic ureteric complications in both groups it is registered.

Conditions

• Ureter Stone

Interventions

DEVICE

Basket of wire

(using a basket of wires3F) the helical type was passed through the four wires of the working channel of the orthoscope and routed to the proximal part of the rock, and the stone was routed to the bowl, then the stone was ducted The gasket was kept, and the probe of the pneumatic crusher also passed through the working channel and proceeded to break it down. Conditions were observed during the stomach as control group. Urethroscopic crushing was performed by a urologist in both groups under similar technical conditions. Findings during and after the completion of crushing include the success, stone retropulsion or parts larger than 3 mm, which requires secondary measures (SWL - ureter stenting, resection ureteroscopy), the duration of stone breakdown and traumatic ureteric complications in both groups it is registered

PROCEDURE

control group, no basket

In each group, ureteroscopy was performed using a standard F9.5 ureteroscope. After reaching the rock in group A (control), the probe of the pneumatic crusher was passed through the working channel of the ureteroscope and began crushing the rock. During the crushing process, the minimum flow of water, flattening and the single-shot impact was used to minimize the stone's retropulsion.

Sponsors & Collaborators

• Mohammad Sadegh Bagheri Baghdasht

  lead OTHER

Study Design

Allocation

RANDOMIZED

Purpose

TREATMENT

Masking

SINGLE

Model

PARALLEL

Eligibility

Min Age

30 Years

Max Age

60 Years

Sex

ALL

Healthy Volunteers

No

Timeline & Regulatory

Start

2015-04-29

Primary Completion

2017-01-18

Completion

2018-04-20

Countries

• Iran

Study Locations