Single Retainer All-Ceramic Resin-bonded Fixed Dental Protheses
NCT01411592 · Status: UNKNOWN · Phase: NA · Type: INTERVENTIONAL · Enrollment: 30
Last updated 2014-09-11
Summary
The purpose of this prospective study was to evaluate the clinical outcome of all-ceramic RBFDP with a cantilevered single-retainer design made from zirconia ceramic. To evaluate the impact of the adhesive system used an established resin cement with an integrated adhesive monomer (Panavia 21 TC) and a resin cement with a separate primer (Multilink Automix with Metal/Zirconia Primer) were compared within the study on a randomized basis.
The aim of the present randomized study was to evaluate wether the difference in bond strength of Panavia and Multilink Automix with Metal/Zirconia Primer to densely sintered zirconia ceramic (IPS e.max ZirCAD, Ivoclar Vivadent) has any impact on the clinical outcome of all-ceramic RBFDP with a cantilevered single-retainer design.
Conditions
- Restauration in Situ
- Final Loss of Restauration
- Debonded Restauration
Interventions
- OTHER
-
Multilink
After air-abrasion of the retainer wings (50 µm alumina particles at 0.25 MPa) and etching the enamel with 36% phosphoric acid for 30 sec, the RBFDPs were inserted using an adhesive bonding system with a phosphonic acid acrylate primer for the zirconia ceramic (Multilink-Automix bonding system with Metal/Zirconia primer)
- OTHER
-
Panavia 21 TC
After air-abrasion of the retainer wings (50 µm alumina particles at 0.25 MPa) and etching the enamel with 36% phosphoric acid for 30 sec, the RBFDPs were inserted using a phosphate monomer containing resin (Panavia 21 TC) without any primer
Sponsors & Collaborators
-
Ivoclar Vivadent AG
collaborator INDUSTRY -
University of Kiel
lead OTHER
Principal Investigators
-
Matthias Kern, DDS, PhD · University of Kiel
Study Design
- Allocation
- RANDOMIZED
- Purpose
- TREATMENT
- Masking
- NONE
- Model
- PARALLEL
Eligibility
- Min Age
- 14 Years
- Sex
- ALL
- Healthy Volunteers
- Yes
Timeline & Regulatory
- Start
- 2006-10-31
- Primary Completion
- 2008-04-30
- Completion
- 2018-04-30
More Related Trials
-
Clinical Performance of Long-span Fixed Partial Dentures
NCT04166695 ·Status: RECRUITING ·Phase: NA
-
Clinical Investigation on Zirconia-ceramic Three-unit Bridges With CAD-on Veneering
NCT02175329 ·Status: COMPLETED ·Phase: NA
-
A Proof of Concept for All-ceramic Zirconia Resin Bonded Bridges for Canine, Premolar and Short Span Posterior Teeth
NCT02793037 ·Status: COMPLETED ·Phase: NA
-
Comparison of Synthetic Bone Substitute and a Bovine-derived Xenograft in Horizontal Bone Augmentation
NCT00901017 ·Status: COMPLETED ·Phase: NA
-
Natural Dentition, Prosthesis and Antagonist Wear 3D Analysis
NCT05637619 ·Status: RECRUITING
-
Outcome Evaluation of Ceramic Crowns Using Two Different Dental Cements
NCT00591942 ·Status: COMPLETED ·Phase: NA
-
Properties and Clinical Performance of Zirconia-based Dental Ceramics
NCT00737308 ·Status: COMPLETED ·Phase: NA
-
RCT: Titanium vs FCZ vs Zirconia Framework
NCT05296291 ·Status: RECRUITING ·Phase: NA
-
Transcrestal Lateral Sinus Floor Elevation in Implant Therapy
NCT03496038 ·Status: UNKNOWN ·Phase: NA
-
Minimally Invasive Treatment of Worn Dentition With Innovative CAD-CAM Composites
NCT02828696 ·Status: UNKNOWN ·Phase: NA
-
Dental Implant Supported Removable Dental Prostheses
NCT03041597 ·Status: COMPLETED ·Phase: NA
-
Assessment of the Effect of an Implant System With a Novel Abutment Attachment Design on Crestal Bone Preservation
NCT01529879 ·Status: COMPLETED ·Phase: NA
-
Single-retainer Lithium Di-silicate Versus Zirconia Resin Bonded Bridge for Replacement of an Anterior Missing Tooth.
NCT05861921 ·Status: COMPLETED ·Phase: NA
-
A Clinical Trial of Dental Device Cemented with Polymethyl Methacrylate (PMMA) Bone Cement
NCT06018701 ·Status: RECRUITING ·Phase: EARLY_PHASE1
-
Resin-Cement Type Influence on Cement Remnants in Implant-Supported Restorations
NCT06711237 ·Status: COMPLETED ·Phase: NA
-
Single-implant Overdentures Retained by the Novaloc Attachment System
NCT03126942 ·Status: COMPLETED ·Phase: NA
-
Implant Retained CAD-CAM Ceramic Crowns
NCT04773873 ·Status: COMPLETED ·Phase: NA
-
Aesthetic Outcomes of Single Tooth Implant Using Metal Ceramic Restorations With Either Zirconia or Titanium Abutments
NCT02315794 ·Status: COMPLETED ·Phase: PHASE2
-
Performance of MicroTextured Dental Implants
NCT01821417 ·Status: COMPLETED ·Phase: NA
-
Patients' Satisfaction and Clinical Investigation of Removable Partial Denture Anchorage With Extracoronal Adhesive Attachments in Comparison With Clasp-retained Partial Dentures
NCT07160660 ·Status: ENROLLING_BY_INVITATION
-
Long-term Study in Early Loaded Hydrophilic Surface Implants
NCT06138392 ·Status: COMPLETED
-
Clinical Performance of 3-Unit FPDs
NCT00223431 ·Status: COMPLETED ·Phase: PHASE2
-
A Study of Osseotite Certain Prevail Implants Used to Support Short Fixed Bridges With Immediate Occlusal Loading.
NCT00728962 ·Status: COMPLETED
-
Esthetic Outcome of 3D Printed Hybrid Ceramics as Final Restorations for Single Screw Retained Implant.
NCT07154602 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Maintenance and Tissues Conditions of Fixed Screw-Retained Implant Prosthesis Versus Implant-Retained Ball Overdentures
NCT04708132 ·Status: COMPLETED ·Phase: NA