Evaluation of Occlusal Contact Distribution in Digitally Fabricated Implant-Retained Fixed Partial Dentures in Mandibular Kennedy Class II Patients Following Artificial Intelligence Bite Optimization: A Quasi-Experimental Study
NCT07657910 · Status: NOT_YET_RECRUITING · Phase: NA · Type: INTERVENTIONAL · Enrollment: 15
Last updated 2026-06-18
Summary
The aim of the study is to evaluate the occlusal contact distribution in digitally fabricated implant-retained fixed partial dentures in mandibular Kennedy Class II patients before and after artificial intelligence bite optimization.
Conditions
- Partially Edentulous Mandible
Interventions
- PROCEDURE
-
After
The data acquisition will take place by scanning the patients using Medit intraoral scanner. Then, the scanned stls will be imported in 3shape software version 2024 and bite optimization module in it will be run. It automatically recalculates the position of the bite relation using its integrated AI. After that, the resulted STLs will be exported and re-imported to ExoCAD software to design the prostheses.
- PROCEDURE
-
Before
The recruited patients will be screened for proper bone architecture and CBCTs will be taken for proper virtual implant planning. Two implants will be placed in the edentulous span in all participants. All surgical steps will be held according to standard protocol. After the implant osseointegration period, the prosthetic phase will start with implant exposure and placement of multiunit abutments. After gingival healing, intraoral scans for the implants timing using abutment level scan bodies will be taken. Then, the fabrication of implant-retained fixed partial denture will be done with a fully digital workflow.
Sponsors & Collaborators
-
Cairo University
lead OTHER
Study Design
- Allocation
- NON_RANDOMIZED
- Purpose
- TREATMENT
- Masking
- NONE
- Model
- SEQUENTIAL
Eligibility
- Min Age
- 18 Years
- Sex
- ALL
- Healthy Volunteers
- Yes
Timeline & Regulatory
- Start
- 2026-06-30
- Primary Completion
- 2026-09-30
- Completion
- 2026-09-30
Countries
- Egypt
Study Locations
More Related Trials
-
Implant Retained Overdenture VERSUS Implant Canine Retained Overdenture.
NCT07046104 ·Status: COMPLETED ·Phase: NA
-
Mandibular Implant Overdenture With OT Cap Bar vs Bar Attachment
NCT07067190 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Impact of Implant Supported Overdenture on Changes of Electromyographic and Brain Activity
NCT05493579 ·Status: COMPLETED ·Phase: NA
-
Compare the Difference in Occlusal Force Distribution and Denture Retention Using 2 Different Denture Base Materials in Implant Retained Overdenture
NCT07250503 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Comparative Evaluation of Masticatory Efficiency of Implant Supported Overdenture
NCT05877092 ·Status: COMPLETED ·Phase: NA
-
Digital Occlusal Wafer Versus Waferless Distal Segment Repositioning for BSSO in Skeletal Mandibular Deformities
NCT05151042 ·Status: UNKNOWN ·Phase: NA
-
Computer Guided Placement of Zygomatic Implants in Two Different Approaches
NCT06129695 ·Status: COMPLETED ·Phase: NA
-
Biting Force in Heat Cured Acrylic Resin Versus CAD/CAM Maxillary Single Denture Bases
NCT02996123 ·Status: UNKNOWN ·Phase: NA
-
Artificial Intelligence Assisted Workflow Versus Conventional Workflow in Guided Implant Placement
NCT07523815 ·Status: RECRUITING ·Phase: PHASE4
-
Assessment of Accuracy and Aesthetics Following Automated Mandibular Defect Reconstruction Using AI
NCT06945692 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Biting Force and Chewing Efficiency of Complete Dentures.
NCT04793503 ·Status: COMPLETED ·Phase: NA
-
Artificial Intelligence Assisted Socket Shield With Computer Guided Implant Placement
NCT06299449 ·Status: COMPLETED ·Phase: NA
-
Effect of Concentrated Growth Factors on Short Implant-Supported Overdentures
NCT06880965 ·Status: COMPLETED ·Phase: PHASE2/PHASE3
-
Occlusion and Disocclusion Time in Immediately Loaded Overdentures Supported by Two Splinted Versus Non Splinted Interforaminal Implants
NCT06376019 ·Status: COMPLETED ·Phase: NA
-
Effect of Implant Position on Clinical Outcomes
NCT06166316 ·Status: COMPLETED ·Phase: NA
-
Assessment of Wear and Muscular Efficiency of 3D Printed Versus Conventional Denture Teeth: A Cross-Over In Vivo Study
NCT07035574 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Evaluation Of Marginal Bone Height Changes And Biting Force In Screw Retained Implant Prostheses Using Reinforced Resin Vs Monolithic Zirconium
NCT07007572 ·Status: RECRUITING ·Phase: PHASE2
-
Conventional Versus Neutral-Zone CAD/CAM Dentures Restoring Mandibular Resorbed Ridges
NCT05895292 ·Status: COMPLETED ·Phase: NA
-
Impact of Mandibular Overdenture Base Construction Techniques on Assessment of Occlusion
NCT06080815 ·Status: COMPLETED ·Phase: NA
-
Evaluation of the Effect of Osseodensefication Technique Versus Conventional Implant Drilling Technique in Implant Supported Mandibular Overdenture
NCT06590753 ·Status: RECRUITING ·Phase: NA
-
Clinical Evaluation of Conventional and 3D-printed Implant-supported Overdentures Retained With New Attachment Systems
NCT07580534 ·Status: ENROLLING_BY_INVITATION ·Phase: NA
-
Different Implant Positions for Implant Retained Mandibular Overdenture
NCT06055842 ·Status: COMPLETED ·Phase: NA
-
T-Scan Study of Occlusion in Case of Implant Retained Overdenture
NCT03887975 ·Status: COMPLETED ·Phase: NA
-
Jaw Tracking Impact on Occlusion and Patient Outcomes in Maxillary Implant Restorations
NCT07693946 ·Status: RECRUITING ·Phase: NA
-
Artificial Intelligence-Enhanced Three-Dimensional Reconstruction of Ridge Deficiencies
NCT06693921 ·Status: COMPLETED ·Phase: NA