GMK Sphere TiNb Total Knee Arthroplasty PMS Study
NCT04801654 · Status: RECRUITING · Type: OBSERVATIONAL · Enrollment: 155
Last updated 2024-05-01
Summary
Total knee arthroplasty (TKA) is one of the success stories of modern surgery, providing high patient satisfaction outcomes. Total knee prostheses are generally composed by a femoral component articulating on a polyethylene insert and a tibial tray.
Recently there has been particular attention on the component material; traditionally femoral components are made of cobalt alloys while tibial baseplates are made, in the great majority of cases, of metallic materials, but also polyethylene versions are available. There has been a degree of acceptance in some countries that metal related pathology may exist as demonstrated by the Australian Arthroplasty register where metal hypersensitivity was reported as the fifth most common cause for revision hip arthroplasty 2012 report, making up for 5.9% of all revisions. The wording was subsequently changed from "metal sensitivity" to "metal related pathology" in the 2014 report with 0.5% of all revision total hip arthroplasties (THA) associated with this term. The same change in terminology was used for TKA with metal sensitivity as a cause for revision in 1.3% of revisions in 2012 and in 2014, 1.8% of revision TKAs attributed to "metal related pathology" . The overall revision rate was 3.45% after 10 years in 396.472 TKAs, suggesting a revision rate of 0.06-0.32% secondary to metal or cement allergies. Up to today there is no question that metallic implants may generate wear debris that cause local reactions. This local reaction is not dose related nor predictable and therefore not purely due to the toxic effect of the debris but possibly due to an immunological host process. Hypersensitivity to metal undoubtedly exists but it cannot be stated at the moment to be an allergic reaction. To prevent issues arising due to metal related pathology, alternative solutions to conventional chrome cobalt material have been proposed, for example ceramic component or implant coating. In particular, TiNbN coating has been proposed by most companies thanks to its excellent biological properties. Preclinical studies have showed a high scratch resistance and low coefficient of friction, more resistance to fretting corrosion, reduction of wear, lower ion release rates and low fatigue cycle, as described in the review of Hove. Clinically, cohort of studies of TiN-coated implants showed an overall survival exceeding 90% with a follow-up of 15 to 77 months and good clinical outcomes. No reports of adverse effects related to TiN coating of CoCrMo knee implants have been showed. There are few studies that compared TiN-coated implants with the same uncoated version. Thienpont, comparing TiN-coated and uncoated CoCrMo implants, showed similar clinical and radiological outcomes at short-term follow up in both patients groups .
Overall we can conclude that in literature no adverse events have been reported concerning the TiNbN coating and in particular it has been showed that the coating doesn't not affect the performance of the device if compared with the same uncoated version.
The aim of this study is to evaluate the long term clinical and radiological performance of GMK Sphere total knee component, coated version.
Conditions
- Total Knee Arthroplasty
Interventions
- DIAGNOSTIC_TEST
-
blood sample
preoperative and at 6 months and 1 year follow-up after the surgery the patients will take a blood sample
Sponsors & Collaborators
-
Medacta International SA
lead INDUSTRY
Eligibility
- Min Age
- 18 Years
- Sex
- ALL
- Healthy Volunteers
- No
Timeline & Regulatory
- Start
- 2020-02-05
- Primary Completion
- 2033-02-05
- Completion
- 2033-12-05
- FDA Device
- Yes
Countries
- Italy
Study Locations
More Related Trials
-
RSA and Clinical Comparison of Anatomical and Mechanical Alignment in Total Knee Replacement
NCT02256904 ·Status: UNKNOWN ·Phase: NA
-
Comparison of Pivotal Medial Polyethylene Versus Ultra-congruent in Total Knee Arthroplasty
NCT06676189 ·Status: RECRUITING ·Phase: NA
-
All Polyethylene Versus Metal Backed Tibial Components in Knee Replacement
NCT02482493 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
Comparison of Joint Awareness Between Fixed-bearing and Mobile-bearing Total Knee Arthroplasty Using Titanium-nitride Coated Posterior-stabilized Prostheses
NCT04684160 ·Status: UNKNOWN ·Phase: NA
-
Femoral Extramedullary Versus Intramedullary Alignment Systems in Total Knee Arthroplasty
NCT03085121 ·Status: UNKNOWN ·Phase: NA
-
Clinical and Radiological Impact of Tibial Cutting Int Total Knee Arthroplasty, Accelerated Navigation Versus Extramedullary Targeting
NCT03951545 ·Status: UNKNOWN ·Phase: NA
-
Unicondylar- or Total Knee Replacement? Patient Satisfaction, Function and Muscle Mass
NCT02563756 ·Status: UNKNOWN ·Phase: NA
-
A Comparison of Anatomically Aligned Versus Conventional in Unilateral Total Knee Arthroplasty
NCT04181528 ·Status: UNKNOWN ·Phase: NA
-
Total Knee Arthroplasty: Relation Between Patient Satisfaction and Implant Geometry
NCT02663804 ·Status: COMPLETED ·Phase: NA
-
PMCF Study to Evaluate Safety of TIPMED TPM08 Total Knee Prosthesis Systems and TPM Revision Knee Prosthesis Systems
NCT05400447 ·Status: COMPLETED
-
Partial Versus Total Knee Replacement in Bicompartmental Gonarthrosis (Medial and Patellofemoral): Prospective Functional Assessment Study
NCT06305858 ·Status: RECRUITING ·Phase: NA
-
Comparison of Stability and Outcomes in Single-radius Femoral Component for Total Knee Arthroplasty
NCT01379755 ·Status: UNKNOWN
-
Total Knee Replacement With the Attune vs. the Press Fit Condylar (PFC) Sigma.
NCT03077958 ·Status: UNKNOWN ·Phase: NA
-
Long-Term Comparison of Fixed- and Mobile-Bearing Total Knee Arthroplasties (TKAs) in Patients With OA ≤50 Years Old
NCT01361152 ·Status: COMPLETED ·Phase: PHASE4
-
Tibial and Femoral Components Migration and Adaptive Bone Remodeling After Insertion of Persona® TKA
NCT03563131 ·Status: ACTIVE_NOT_RECRUITING ·Phase: NA
-
A Post-Market, Retrospective Study on 3D Metal Tibial and Femoral Cones
NCT06578897 ·Status: COMPLETED
-
Cemented Versus Uncemented Total Knee Arthroplasty : a Prospective Randomized Study
NCT02355652 ·Status: WITHDRAWN ·Phase: PHASE4
-
Impact of Different Perioperative Tourniquets on Blood Loss and Surgeon Satisfaction in Total Knee Arthroplasty
NCT06947655 ·Status: RECRUITING ·Phase: NA
-
Comparison of Anatomically Aligned and Conventional Total Knee Arthroplasty in the Same Patients
NCT04181216 ·Status: UNKNOWN ·Phase: NA
-
An Artificial Intelligence-based Approach in Total Knee Arthroplasty: From Inflammatory Responses to Personalized Medicine
NCT06634654 ·Status: RECRUITING ·Phase: NA
-
Long-term Evaluation Protocol (12 Months Postoperative) of Total Knee Prostheses Anatomic With Resurfaced Patella Versus Non-resurfaced Patella in Patients Requiring Total Knee Arthroplasty
NCT03081260 ·Status: COMPLETED ·Phase: NA
-
Residual Pain After Successful Implant of Metaphyseal Sleeves in Total Knee Arthroplasty
NCT04995679 ·Status: COMPLETED ·Phase: NA
-
Comparison of Highly Cross-Linked and Conventional Polyethylene in Total Knee Arthroplasty
NCT02020057 ·Status: COMPLETED ·Phase: NA
-
Stability of the Medial Pivot Total Knee Prosthesis
NCT02577978 ·Status: COMPLETED ·Phase: NA
-
Comparison of Functional Outcomes of Three Surgical Approaches in Knee Arthroplasty
NCT00983762 ·Status: TERMINATED