The Use of Bone-, Tooth- and Mucosa- Supported Stereolithographic Guides for Dental Implant Placement
NCT01027442 · Status: COMPLETED · Phase: NA · Type: INTERVENTIONAL · Enrollment: 61
Last updated 2013-11-27
Summary
Introduction:
The use stereolithographic (SLA) guides may provide significant benefits in simultaneous placement of multiple implants, especially in large edentulous areas lacking anatomic landmarks for surgical reference. Planning of the implant positions prior to surgery may shorten the duration of the surgery spent by exploring and determining the suitable implant location on the edentulous alveolar crest in the standard technique . Previous studies have demonstrated the use of many SLA guide in this manner, however; most were designed to be used as placed on the alveolar crest (bone-supported) following a flap exposure, and there was no depth-control of the osteotomy drills. Further advances in stereolithography allowed flapless surgeries to be performed via mucosa-supported guides (Rosenfeld, et al. 2006c, Tardieu, et al. 2007). The use of these guides eliminates not only the time required for incision and flap exposure but post-operative patient morbidity and discomfort may also be reduced, due to the non-invasive nature of the procedure. The aim of this study is to investigate the accuracy, surgical and post-operative complications and post-loading outcomes of implants placed by the conventional and aforementioned computer-aided methods.
Conditions
- Stereolithography
- Dental Implants
- Prosthesis
Interventions
- DEVICE
-
Mucosa-supported single-type guides
Compute generated Mucosa-supported single-type guides
- DEVICE
-
Bone-supported guides
Computer generated, Multiple type Bone-supported guides
- DEVICE
-
Dental Implants
Dental implants placed via conventional free-hand method
Sponsors & Collaborators
-
Risus medikal, Thommen medical (Switzerland) Turkish partner
collaborator UNKNOWN -
Dentsply Implants Manufacturing GmbH
collaborator INDUSTRY -
Istanbul University
lead OTHER
Principal Investigators
-
Tayfun Ozdemir, Prof.Dr. · Section head: Department of Implantology, Faculty of Dentistry, Istabul University
-
Volkan Arısan, Dr.Med.Dent · Department of Oral Implantology, Istanbul University
-
Cuneyt Z Karabuda, Prof.Dr. · Department of Oral Implantology, Istanbul University
Study Design
- Allocation
- NON_RANDOMIZED
- Purpose
- SUPPORTIVE_CARE
- Masking
- SINGLE
- Model
- PARALLEL
Eligibility
- Min Age
- 18 Years
- Sex
- ALL
- Healthy Volunteers
- Yes
Timeline & Regulatory
- Start
- 2008-07-31
- Primary Completion
- 2009-01-31
- Completion
- 2009-12-31
Countries
- Turkey (Türkiye)
Study Locations
More Related Trials
-
Surgical Guided Fabricated From Two Different Printing Materials
NCT06628492 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
A Study of a Surgical Guide for Dental Implantology
NCT03854162 ·Status: COMPLETED ·Phase: NA
-
Long-term Study in Early Loaded Hydrophilic Surface Implants
NCT06138392 ·Status: COMPLETED
-
Implant-Abutment Interface Design on Bone and Soft Tissue Levels Around Implants Placed Using Different Transcrestal Sinus Floor Elevation
NCT02953392 ·Status: COMPLETED ·Phase: NA
-
Accuracy of Static Guided Implant Surgery: 3D-printed vs Milled Surgical Guides
NCT06819995 ·Status: RECRUITING ·Phase: NA
-
Clinical Study Investigating the Efficiency and Complications Related to Two Different Procedures Used for the Preparation of Dentures Applied in Patients With Edentulous
NCT05332977 ·Status: NOT_YET_RECRUITING ·Phase: NA
-
Passive Fit of Implant-Supported Complete-Arch Prostheses Using Digital Workflows
NCT07315620 ·Status: RECRUITING ·Phase: NA
-
Accuracy of Dental Implant Position Robotic Assistance, Dynamic Navigation, or Static Guide?
NCT05892406 ·Status: UNKNOWN ·Phase: NA
-
Survival and Success Rates of 6mm Implants With a Micro-rough Surface After 4.5 - 18.2 Years in Function
NCT04017026 ·Status: COMPLETED
-
3D Assessment of Mandibular Bone Loss Via STL Superimposition After Complete Denture Occlusal Adjustment
NCT06562972 ·Status: COMPLETED ·Phase: NA
-
Immediate Implant Placement in the Esthetic Zone
NCT01533571 ·Status: UNKNOWN ·Phase: NA
-
Use of Specifically Designed Drills for Internal Sinus Lifting
NCT06640127 ·Status: COMPLETED ·Phase: NA
-
Four-unit Implant Supported Fixed Partial Dentures Fabricated From Different Materials
NCT06422260 ·Status: RECRUITING
-
Dynamic Navigation-Assisted Dental Implant Placement
NCT03471208 ·Status: COMPLETED ·Phase: NA
-
Prosthetic and Biological Complications of Implant Supported Prostheses
NCT05297253 ·Status: COMPLETED
-
Dental Implants Placed by Using a Drill Guide Versus Non-guided Placement. Follow-up Study
NCT03041584 ·Status: COMPLETED ·Phase: NA
-
Fabrication of a Definitive Cad/Cam Titanium Abutment Prior to Guided Surgery: a Pilot Study.
NCT02218541 ·Status: COMPLETED ·Phase: NA
-
Evaluating the Accuracy of Dynamic Navigation in Implant Surgery for Full Arch Prosthesis
NCT06963242 ·Status: RECRUITING ·Phase: NA
-
Clinical Performance of CAD/CAM Splint Materials
NCT05955222 ·Status: COMPLETED ·Phase: NA
-
Artificial Intelligence Assisted Socket Shield With Computer Guided Implant Placement
NCT06299449 ·Status: COMPLETED ·Phase: NA
-
Submerged vs. Nonsubmerged Single Laser-microgrooved Dental Implants.
NCT03674762 ·Status: COMPLETED ·Phase: NA
-
Conventional and Ultrasonic Implant Site Preparation
NCT03357406 ·Status: COMPLETED ·Phase: NA
-
Investigation Of Marginal Bone Loss In Implants With Different Surface Properties And Geometric Designs: A Retrospective Clinical Study
NCT06148012 ·Status: COMPLETED ·Phase: NA
-
Clinical Evaluation of RTX Locator Attachments for Implant-supported Mandibular Complete Overdenture
NCT05290376 ·Status: COMPLETED ·Phase: NA
-
Bone-To-Implant Contact At 4- And 6-Week Healing Stages in Implants With Different Surfaces.
NCT05558800 ·Status: COMPLETED ·Phase: NA